Behind The Scenes Building Your Dowina Guitar!

• Building Your Dowina Guitar: Stage 1

  Selecting Suitable Top Plate Drawing Body Shape To Test Visual Suitability Cut Top, Back & Sides Tuning Top Bending Sides Glue Top, Back & Sides Ribs Assembly

• Building Your Dowina Guitar: Stage 2

  Stage 2: -Once the plates are glued / bookmatched on „devil’s wheel“, rosettes are done. -After that the shapes ( GAC/Dc/BV...)are lasercut -Then the thickness of each plate is done – photo of Martin. We test each one plate, the rigidity/ flexibility -Braces are glued on both back plate and...

• Building Your Dowina Guitar: Stage 3

  Binding Sanding Neck / Body Joint Binding Purfling Endpiece Sanding of the body Sanding of the neck Dove Tail joint – check the geometry And at the end of this we have something that looks like a guitar Body , neck, fingerboard

• Building Your Dowina Guitar: Stage 4

  Varnish Room Stage 4 B Gluing the neck to the body Fretboard levelling And some decorative operations on headstock, fingerboard possible Stage 4C Bridge ( Rasto) and Frets ( Bruno)

• Building Your Dowina Guitar: Stage 5

  Setup department Complete setup of the guitar Saddle, nut, mecchanics Installation of electronics Again big QC point

• Building Your Dowina Guitar: Stage 6

  Stock Ready to be shipped

• Building Your Dowina Guitar: Stage 7

  Final Setup & Preparation For Dispatch